Aquacal TropiCal T170, Руководство по эксплуатации

Страница: 11 / 73

Page - 7
1.5 Activate HEAT Mode, COOL Mode, AUTO Mode, or Deactivate Equipment
Press "Mode / Enter" button until the desired mode is displayed.
l
"HEAT" mode - After the fan and compressor start, the red "Heating" light will activate.
l
"COOL" mode - After the fan and compressor start, the blue "Cooling" light will activate.
l
"AUTO" mode - After the fan and compressor start, the heat pump will maintain the set
temperature within 1°. The red "Heating" or blue "Cooling" light will activate.
l
"OFF" - The heat pump will indicate it is deactivated. Any equipment connected to the heat
pump will continue to operate. To deactivate all equipment connected to the heat pump,
activate the service mode.
See " Service Mode " on page 54.
HEAT THE WATER
Use Mode Button to Select
COOL THE WATER
Use Mode Button to Select
USE AUTO MODE
Use Mode Button to Select
DEACTIVATE UNIT
Use Mode Button to Select
1.6 Set a desired temperature (setpoint) for the heat pump to activate
Press the up or down arrow to set the desired temperature (setpoint) for the water.
l
The heating indicator will illuminate when heating the water.
l
The cooling indicator will illuminate when cooling the water.
PLEASE NOTE:
The heat pump will not operate if incoming water temperatures are above 110° F (43° C).
If sustained water temperatures will fall below 32° F (0° C), the equipment must be
winterized in order to prevent damage. See "Winterizing" on page 38.
NOTE:
If a group's schedule is active and the temperature setpoint is changed, that group's
temperature setpoint will also be changed.
1
HEAT THE WATER
Use Mode Button to Select
2
USE ARROWS TO
SET TEMPERATURE
LED ILLUMINATES AFTER
COMPRESSOR STARTS
1
-
O
pe
ra
tion