Aquacal STK0247, Инструкция по установке и быстрому запуску

Страница: 13 / 19

Page - 10
Spa Only, No Valves, Jandy VS
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A Jandy variable speed circulation pump is
configured.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Spa - With an initial timer of 2 hours at 104° F.
2. Spa - With an initial timer of 2 hours at 96° F ( 104° F with an installed OTA kit ).
3. Schedules
Spa Only, No Valves, Single Speed Circulation Pump
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A single speed circulation pump is
configured to use the relay "A" connection
point on the expansion board.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Spa - With an initial timer of 2 hours at 104° F.
2. Spa - With an initial timer of 2 hours at 96° F ( 104° F with an installed OTA kit ).
3. Schedules