Aquacal HeatWave SuperQuiet SQ120R, Руководство по эксплуатации

Страница: 6 / 58

Page - 3
1 - Operation
IN THIS SECTION:
1.1 Display Door 3
1.2 Wake Up Heat Pump 3
1.3 Display Panel 4
1.4 Activate Heat Mode, Cool Mode, Auto Mode, or Deactivate Equipment 6
1.5 Set Temperature 7
1.6 Set Up Programming 7
1.6.a Setting Date and Time 7
1.6.b Using Entry Code to Access Heat Pump 9
1.6.c Setting Entry Code Option 9
1.6.d Disabling Entry Code Option 11
1.6.e Configure Variable Speed Compressors 12
1.7 External Equipment 17
1.7.a Operating Heat Pump with a Call Flex 17
1.7.b Operating Heat Pump (With an External Controller) 20
1.7.c Operating Heat Pump (With an External Flow Switch) 20
1.7.d Operating Heat Pump (With a Gas Back-Up) 20
1.7.e Operating Multiple Connected Heat Pumps 22
1.1 Display Door
The display panel is located in a door compartment on the front of the heat pump. This compartment is
designed to protect the display against harsh weather. It can also be padlocked for extra security.
l
Press the bottom of the
panel to open the
display panel door.
l
To close, push the
display panel up. Then
press the
bottom of the
panel in until a clicking
noise is heard.
1.2 Wake Up Heat Pump
The display's backlight will be off when the heat pump is in
sleep mode. To wake up the heat pump, slowly slide a finger
across the buttons.
l
The display will illuminate.
l
The message "KEYPAD UNLOCKED" will briefly appear.
l
Then the water temperature and mode will display.
1
-
O
pe
ra
ti
on