IMPORTANT: When connecting the cable fully
tighten the terminal block screws and make sure
that no cable insulation is trapped under the
screws. Loose connections can result in cable
overheating.
NOTE: The supply cable earth conductor must
be sleeved. The outer sheath of the supply
cable must be stripped back to the minimum.
The use of connections within the unit or other
points in the shower circuit to supply power to
other equipment i.e. extractor fans, pumps etc.
will invalidate the guarantee.
DO NOT switch on the electricity supply until
the shower cover has been fitted.
NOTE:The elements on UK models are to
240V specification and will give a lower kW
rating if the voltage supply is below 240V.
ELECTRICAL WIRING
