11
❹ Maintenance
• The device must be cleaned regularly using clean or slightly soapy water. Do not use any solvents.
• Rinse the device generously using clean water.
• Never store the cleaner in direct sunlight. Store the hoses laying fl at and not coiled to prevent unwanted hose memory.
4.1 I Cleaning the fi ltrati on pump basket
•
Always remove the cleaner from the pool before cleaning or bleeding the fi ltrati on system.
•
Before cleaning (and before you put the cleaner back into the water), start the fi ltrati on pump
for at least 5 minutes before you bleed the circuit.
• For maximum cleaner performance it is recommended the fi ltrati on pump basket be kept clean by removing debris
as needed.
• Use of the Cyclonic
TM
Leaf Catcher (accessory included or opti onal depending on the model) is recommended to
collect large debris before it reaches the skimmer and the pump basket
.
4.2 I Cleaning the "Cyclonic
TM
" Leaf Catcher
• Turn off the fi ltrati on pump.
• Keep the Cyclonic
TM
Leaf Catcher under the water and take hold of it by the handle. Using the handle, turn the
transparent canister unti l it detaches (see image ).
• Remove the transparent canister from the water and leave the lid and the hoses under the water (see image ).
• Remove the fi lter using the top handle (see image ).
• Remove the debris and rinse the transparent canister in clean water (see image ).
• Put the fi lter back in place and immerse the Cyclonic
TM
Leaf Catcher again (see image ).
• Positi on the transparent canister correctly on the lid notches then turn it sharply to push the 2 parts in (see image ).
