User Manual Thermal X - R Series Chillers
Page 6
First Aid
Eye
Contact:
Immediately flush with tepid water or sterile saline solution. Hold eyelids apart for 15 minutes
while irrigating. Seek medical attention.
Inhalation:
Remove from the area of exposure immediately and if you are assisting a victim to avoid being
exposed. Breathing apparatus must be worn in the presence of high concentration of refrigerants.
If victim is not breathing then apply artificial respiration and seek urgent medical help. Give
oxygen is available.
Skin
Contact:
Cold Burns. Remove contaminated clothing and gently flush affected area with warm water
(30°C) for 15 minutes. Apply sterile dressing and treat as for a thermal burn. For large burns
immerse in water for 15 minutes. DO NOT apply any form if direct heat. Seek medical attention.
Ingestion:
For advice contact the poisons centre on 131126 in Australia. If swallowed do not induce
vomiting. Ingestion is considered unlikely due to product form. Advice to Doctor. Use of
adrenaline and other catecholamines may be contraindicated due to possible cardiac sensation.
Treatment for asphyxia.
INSTALLATION REQUIREMENTS
Immediately upon receipt of the chiller, carefully inspect the chiller for any damage that may have
occurred in transit. Any such damage must be noted on the carrier’s delivery documents. It is the
consignee’s responsibility to make any subsequent claims upon the carrier or respective insurance
company. Any hidden damage should be reported to Aqua Cooler as soon as possible.
If the unit is to be stored before installation, then care must be taken to ensure no foreign matter can
get into the water pipes. If the storage is for a prolonged period, it is recommended that the water
circuit be changed with nitrogen and sealed.
A comprehensive commissioning program carried out by qualified refrigeration mechanics is
available through Aqua Cooler. For full details and conditions please contact Aqua Cooler. There is
also a site inspection procedure at the end of this manual.
The unit has been designed to be lifted with a forklift or a crane. The care must be taken when lifting
with a crane that the strapping does not damage the side panels. The units are also designed to be
moved around with a pallet jack, some models also have castor wheels.
The commissioning section at the end of this manual has a site inspection checklist designed to aid in
checking that the site for the chiller installation is suitable. This should be filled out by someone
experienced in chiller installation and returned to Aqua Cooler if there are any doubts about the
installation. It is essential to ensure that adequate and safe service access to the chiller is provided.
Failure to provide safe access to the chiller may lead to additional charges should servicing be
required.
When installing indoors it is important to understand that the chiller will impart a significant heat
load into the environment, and it is essential to ensure a plentiful, unrestricted supply of ambient
temperature air to the chiller. Should you have concerns over the installation site then please contact
Aqua Cooler for advice.
Note: Under no circumstances is ducting to be attached to the condenser fan outlet.
Содержание Thermal X R Series
Страница 29: ...User Manual Thermal X R Series Chillers Page 29 Installation Sketch Map of Air Cooled Chiller...
Страница 30: ...User Manual Thermal X R Series Chillers Page 30 Installation Sketch Map of Water Cooled Chiller...
Страница 31: ...User Manual Thermal X R Series Chillers Page 31 Internal Structure Sketch Map of Air Cooled Chiller...
Страница 32: ...User Manual Thermal X R Series Chillers Page 32 Internal Structure Sketch Map of Water Cooled Chiller...