Aqua OC-105B, Руководство пользователя, Страница: 7 / 17

SG-B SERIES STEAM GENERATOR
E005-28-10-12 7
Chapter three: installation
★
Isolate the power supply before installation
★
Confirm the model you have selected is suitable for your steam room, please refer to chart 5
★
Mount the steam inlet nozzle approximately 300mm up from the floor and it should be at least 200mm
from person's body.
★
If the steam generator is installed in an inaccessible place ensure that both the electrical power and
water supply can be isolated in an emergency.
★
The minimum water inlet pressure is 0.025MPa and the maximum is 0.8MPa, advise the water
pressure not exceed 0.5MPa
★
The steam pipe from steam generator to steam room should be kept to a minimum, pipes longer than 5
meters should be insulated to prevent heat loss. Steam pipes will be hot during use and must be protected
against accidental contact.
★
Keep the number of right angle bends to a minimum and ensure that the track of the pipe does not
create a trap into which condensate would gather and cause a blockage. I.e. the pipe must not go down and
then up.
★
There must be no valve or other blockage in the steam pipe
★
The steam pipe should be metal of other material which can endure 150
°
C temperature, copper pipe
is recommended.
★
It is not recommended to install the Steam generator outdoors or where it might be affected by frost.
Allow for a minimum space of 0.5 cubic meters to install the generator.
★
Steam generator should be level side to side and front to back and should be installed so that the
arrows on the case point up.
★
Do not install the steam generator in close proximity to hazardous substances.
Chart 5
Model
Po
wer Steam room volume
(m
3
)
Model Power
Steam room volume
(m
3
)
SG-30B
3.0
KW
1.5-3 SG -100B
10.0K
W
6 - 11
SG -40B
4.0
KW
1.8 - 4 SG -105B
10.5K
W
7 - 11
SG -45B
4.5
KW
1.8 – 5 SG -110B
11.0K
W
7 - 12
SG -50B
5.0
KW
2.5 – 5 SG -120B
12.0K
W
8-12
SG -60B
6.0
KW
4 -6 SG -135B
13.5K
W
11-1 6
SG -70B
7.0
KW
5 -7 SG -150B
15.0K
W
11-1 6
SG 80B
8.0
KW
5-9 SG -180B
18.0K
W
13-19
SG -90B
9.0
KW
6 - 10