background image

 

 

05/02/2021 Rev.1

 

4

 

 

1.0  GENERAL COMMENTS 

1.1 Warnings 

The  aim  of  HC899  pump manual  is  to  provide  you  with  all  the  necessary  information  for  a  proper 
installation and maintenance in order to give you optimum results whilst in operation. 
For  this  reason  it  is  really  important  reading with  attention  the  instructions  given  below  since  they 
furnish all the indications necessary for the sureness of the installation, use and maintenance  
 

 

This manual has to be preserved with care to be consulted in whatever 
occasion. 

 

At the moment of the receipt you have to check the integrity of the panel and 
of all its components, in case of anomalies consult skilled staff before making 
interventions. 

 

Before the installation of the pump check that all the data on the pump’s label 
correspond to those of the electrical plant. 

 

Do not operate with bare/naked hands or feet 

 

Do not leave the equipment exposed to the action of the atmospheric agents. 

 

Avoid splashing water 

 

The equipment has to be operated from skilled person. 

 

In case of improper functioning of the panel switch off and contact our 
technical assistance for any necessary repairs. 

 

For a correct functioning it is necessary to use original spare parts and 
original accessories. The producer declines whatever responsibility in 
reference with break down due to tampering or the use of not original spare 
parts and accessories. 

 

The electrical plant has to be in conformity with the rules of the country 
where it is realised. 

 

The room temperature of utilisation can’t over take 45° C 

 
1.2 Shipping and transporting the pump 

The equipment must be transported in its original packaging, organized and built in such a way as to 
minimize  shocks  and  to  protect  the  protruding  parts  that  can  be  damaged.  If  there  is  a  need  for 
transport after the equipment has already been installed (e.g. for a return for repair or replacement), 
reuse  the  original  packaging  or  a  sufficiently  sturdy  packaging  with  the  equipment  protected  with 
absorbent material ( eg bubble wrap). The external packaging must be such as to ensure the safety 
of the equipment in the event of a fall from 1 meter in height

 
1.3 Use of the pump 

The  use  of  this  pump  must  comply  with  the  methods  and  instructions  set  out  in  this  manual. 
The pump can dose chemicals that can be harmful to human health and for this reason it is essential 
that must  be  used by qualified personnel who adopt the appropriate safety  methods and personal 
protective equipment. 
 
AVOID IMPROPER USE of  the equipment  in  order to avoid  damage to things and people,  due to 
uncontrolled splashes, drips, electrical contacts, etc. 
The following uses can be considered improper uses, in indicative and non-exhaustive form: 

-  Dosing of products not consistent with the materials with which the pump is made; 
-  Dosing of explosive and / or flammable products; 
-  Dosing of fluids with excessive viscosity (1000 cps), such as to prevent the priming of the pump 

itself; 

-  Dosage of food liquids, if intended to maintain such use; 

Содержание HC899 Series
























Отзывы: