STANDARD POWER SUPPLIES
Your cleaner is equipped with one of the
power supplies illustrated in this section
(A78002)
(A78080)
STANDARD POWER EXTERNAL RUN BUTTON FEATURE
(select models)
External Run
Button
Blinking Light:
ACTIVATED
Solid Light:
DE-ACTIVATED
Press this button first to activate the power
supply This button turns the power supply
ON / OFF.
Press the switch into the
ON position. The light will
illuminate red on the switch.
The cleaning cycle will run
a for two (2) hours and
automatically turn off when
complete.
Press the
SELECT
Button after turning
the power supply ON. The Select button
activates the Large Pool / Small Pool cleaning
cycles. When the cleaning cycle is running,
the indicator light will stay lit on either Large
Pool or Small Pool. (solid light)
SMALL POOL
= 1 HOUR SHUT-OFF
LARGE POOL
= 2 HOUR SHUT-OFF
If your power supply has an
EXTERNAL RUN
button, then it is capable of connecting
to any *external timer. It is recommended to do the following (in order) to run this
feature:
1.
Connect the external timer to your GFCI outlet, then the power supply to the external timer.
2.
Turn the power supply
ON
3.
Press the
SELECT
button for either the Large Pool or Small Pool cycle.
4.
After the cleaner starts, press the
EXTERNAL RUN
button and the light for the cleaning
selection you’ve made should now be blinking. This indicates the cleaning cycle will now
perform the pre-selected 1 or 2 hour program at the programmed start time which your
external timer is set to run.
To exit this mode, simply press the EXTERNAL RUN button again and the cleaning cycle
durations will be set to their original factory settings. The light should stay continuous
and not blink anymore. *Please note that the external timer is not included with the
cleaner and must be purchased separately.
POWER SUPPLY OPERATION
ON / OFF
ON / OFF
= 1 Hour Shut-off
= 2 Hour Shut-off
= 1 Hour Shut-off
= 2 Hour Shut-off
1
1
2
3
4
2
(A7176DC)
(A78003)
