Aqua PRO APEX Series Скачать руководство пользователя страница 2

 2
 

Table of Contents

Table of Contents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General Safety Guidelines  . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pool Safety Guidelines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Electrical  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Voltage, Grounding/Bonding. . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacement Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Safety Information

DESCRIPTION

These self priming pool pumps are for high efficiency, and easy 
maintenance, with an oversized strainer basket. It is constructed 
of durable thermoplastic for years of trouble free service. These 
swimming pool pumps are designed for use with permanently 
installed swimming pools and spas only. Do not use with storable 
pools.

UNPACKING

After unpacking the unit, carefully inspect for any damage that may 
have occurred during transit. Check for loose, missing or damaged 
parts.

SAFETY GUIDELINES

This manual contains information that is very important to know and 
understand. This information is provided for SAFETY and to PREVENT 
EQUIPMENT PROBLEMS.
As a user, you are important to us. Thus, one copy of the Operating 
Instructions and Parts Manual is included with each pump shipped 
from our factory. This manual contains important sections relative 
to user safety, use, maintenance, warranty, etc. It is a good idea to 
ask for extra copies for other installers/users. Extra copies, free of 
charge, are available.
Do not use pump for any purpose other than pool/spa application. 
Components have not been designed for other applications. Severe 
pump failure, may result. Any unapproved use will void warranty.

CALIFORNIA PROPOSITION 65

WARNING:

 This product may contain chemicals known to 

the State of California to cause cancer and birth defects or 
other reproductive harm. Wash hands after handling.

DANGER:

 To reduce the risk of injury, do not permit 

children to use this product unless they are closely 
supervised at all times.

WARNING:

 Risk of electrical shock. Connect only to a 

branch circuit protected by a ground-fault circuit-interrupter 
(GFCI). Contact a qualified electrician if you cannot verify 
that the receptacle is protected by a GFCI. The unit must 
be connected only to a supply circuit that is protected 
by a ground-fault circuit-interrupter (GFCI). Such a GFCI 
should be provided by the installer and should be tested 
on a routine basis. To test the GFCI, push the test button. 
The GFCI should interrupt power. Push the reset button. 
Power should be restored. If the GFCI fails to operate in 
this manner, the GFCI is defective. If the GFCI interrupts 
power to the pump without the test button being pushed, 
a ground current is flowing, indicating the possibility of an 
electric shock. Do not use this pump. Disconnect the pump 
and have the problem corrected by a qualified service 
representative before using.

CAUTION:

 This pump is for use with permanently- 

installed pools and may also be used with hot tubs and 
spas if so marked. Do not use with storable pools. A 
permanently- installed pool is constructed in or on the 
ground or in a building such that it cannot be readily 
disassembled for storage. A storable pool is constructed so 
that it is capable of being readily disassembled for storage 
and reassembled to its original integrity. Do not install 
within an outer enclosure or beneath the skirt of a hot tub 
or spa.

NOTICE:

 PLEASE SAVE THESE INSTRUCTIONS.

Содержание APEX Series





















Отзывы: