background image

Before First Use / Preparation

Know Your Filter

Read and follow all the instructions, even if you 
feel you are familiar with the product and find a 
place to keep the instructions handy for future 
reference. Your attention is drawn particularly to 
the sections concerning 

“IMPORTANT 

SAFEGUARDS”

 and the 

“GUARANTEE

CONDITIONS”

. Please ensure you retain your 

original purchase receipt in the event that 
guarantee service is required. 

Carefully unpack the MariSys, making sure you 
keep all the packing material until all the parts 
of the product have been found, and the 
product has been assembled. 

This product is shipped to you in a factory 
sealed carton. Should the product malfunction 
in any way or if the unit is damaged and 
requires replacement, contact the retailer 
where the product was purchased for 
inspection.

Replacement Parts & Filter Media

Use Aqua One Genuine Spare Parts Only. 
See your local Aqua One Dealer and look 
for the number listed below for the spare 
part you require. Alternatively you will find 
these numbers on the silver label located 
on the product.

Impeller 

  

  411

I

Overflow Pre Filter Pad 

 

413S

3 x Wool Pack 

 

 

411W

2 x Activated Carbon Pad   

411C

2 x Activated Carbon Pillow 

412C

2 x Wooden Air Stones 

 

50041

Aqua One Spare Parts 

411I

1.    Protein Skimmer Air Pump 
2.    Priming Pump 
3.    Overflow Box 
4.    Protein Skimmer 
5.    MariSys 

1. 

2. 

3. 

4.  

5. 

3

Содержание MariSys 240
















Отзывы: