background image

Important Safeguards

This appliance is not intended for use by 
children or infirm persons without supervi-
sion. Young children should be supervised 
to ensure that they do not play with the 
appliance.

Warning: To guard against injury, basic 
safety precautions should be observed, 
including the following: 

1. Read and follow all safety instructions before 
using this appliance. 

2. Danger: To avoid possible electric shocks, 
special care should be taken since water is 
employed in the use of aquarium equipment. For 
each of the following situations do not attempt 
repairs yourself. Return the appliance to an 
authorised service facility for service or discard the 
appliance.

a) If the electrical components of the appliance get 
wet, unplug the appliance immediately (non 
immersible equipment only). 

b) If the filter shows any sign of abnormal water 
leakage, immediately unplug it from the power 
source.

c) Carefully examine the filter after installation. It 
should not be plugged in when there is water on 
parts which are not intended to be wet. 

d) Do not operate any filter if it has a damaged cord 
or plug, or if it is malfunctioning, or dropped or 
damaged in any manner. 

A “drip loop” (See the diagram) should be arranged 
by the user for each cord connecting an aquarium 
component to a receptacle. The drip loop is the part 
of the cord below the level of the receptacle or the 
connector if an extension cord used. It is used to 
prevent water traveling along the cord and coming 
in contact with the receptacle. 
If the plug or receptacle does get wet, do not 
unplug the appliance. Disconnect the fuse or circuit 
breaker that supplies the power to the appliance, 
then unplug and examine for presence of water in 
the receptacle. 

3. Close supervision is necessary when the 
appliance is used by or near children. 

4. Always unplug the filter from the electrical outlet; 
when not in use, before putting on or taking off 
parts, before any type of maintenance, or cleaning. 

Never yank the cord to pull it from the outlet. Grasp 
the plug and unplug to disconnect. 

5. Do not use the filter for reasons other than the 
intended use. The use of attachments that are not 
recommended or sold by the filter manufacturer 
may cause the product to be unsafe. This is not 
recommended.

6. Do not install or store the filter where it will be 
exposed to weather or temperatures below 
freezing.

7. Make sure any component mounted on a tank is 
securely installed before operating it. 

8. Read and observe all the important notices on 
the filter. 

9. Ensure input voltage is the same voltage as your 
local power supply.  

10. If an extension cord is necessary, a cord with a 
proper rating should be used. Care should be taken 
to arrange the cord so that it will not be tripped or 
pulled.

11. A

 G.F.C.I

 (Ground fault circuit interrupter) & 

surge protector is recommended for all electrical 
appliances.

12. Ensure your hand is dry when turning the 
power switch on/off and when inserting/removing 
the power cord from the receptacle.

13. If you are in any doubt about the electrical 
installation or safety of this product you must 
consult a qualified electrician. 

For Guarantee Conditions, please refer to 

the Guarantee form at the back of this 

instruction booklet. 

Drip loop

2

Содержание MariSys 240
















Отзывы: