![Aqua Medic EcoDrift Series Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/aqua-medic/ecodrift-series/ecodrift-series_operation-manual_2958747008.webp)
8
Fig. 1: EcoDrift Parts Diagram
1.
Filter basket
6. Pump holder
2.
Impeller
7. Vibration dampener with inside magnet
3.
Pump housing
8. Rubber gasket
4.
Rubber gasket
9. Outside magnet
Art.-No.
Pict.-No.
Article
103.504-14
1
Filter basket EcoDrift 4.0
103.508-14
1
Filter basket EcoDrift 8.0
103.515-14
1
Filter basket EcoDrift 15.0
103.520-14
1
Filter basket EcoDrift 20.0
103.504-31
2
Impeller cpl. EcoDrift 4.0
103.508-31
2
Impeller cpl. EcoDrift 8.0
103.515-31
2
Impeller cpl. EcoDrift 15.0
103.520-31
2
Impeller cpl. EcoDrift 20.0
103.504-13
4
Rubber gasket - set
103.504-11
6/7/8
Pump holder EcoDrift 4.0
103.504-11
6/7/8
Pump holder EcoDrift 8.0
103.504-11
6/7/8
Pump holder EcoDrift 15.0
103.504-11
6/7/8
Pump holder EcoDrift 20.0
103.504-12
8/9
Magnet holder EcoDrift 4.0
103.508-12
8/9
Magnet holder EcoDrift 8.0
103.504-11
8/9
Magnet holder EcoDrift 15.0
103.504-11
8/9
Magnet holder EcoDrift 20.0
The EcoDrift is for under water operation, only.
The max. water depth is 1 m | 40 in. We
recommend to place the pump at least 10 cm | 4 in beneath the surface to prevent the pump from
pulling air. The
EcoDrift
is designed as a current pump, thus cannot be connected to any piping.
The pump has a ceramic bearing, which has a break-in period of a few days. During that time a
slightly higher noise level may be noticed.
Assembling the EcoDrift pump:
The pump is assembled to the aquarium glass with its magnet holder. Once the location of the pump
is determined and the area is prepared for placement, please follow these instructions:
1.
Carefully disconnect the outside magnet (9) from the pump assembly without dislodging the
vibration dampener (7) from the pump holder (6).
2.
Apply the pump assembly on the inside of the aquarium upon the gasket (8).
3.
While holding the pump assembly in place, carefully connect the outside magnet (9) upon the
gasket (8) to the pump assembly.
4.
Note:
Never disconnect the outside magnet without shutting off the pump and holding the pump
to prevent it from falling.
5.
To prevent the pump from pulling air, be sure to place it at least 10 cm | 4 in beneath the surface.