7
E
INFLATE THE BOAT
1. Inflate the tube chambers until the surface is free of wrinkles. By partially
inflating the boat, the floor and the bench seat will be easier to install.
2. Place the DWF air deck floor inside of the boat with the air valve facing up.
3. Start to install the wooden bench seat. Slide the bench seat into the position by
inserting the flaps on both chambers of the boat into notches on the seat board.
Please note the second bench seat is sold separately.
4. With the floor installed and the seat in place, you are now ready to fully inflate
the floor up to the maximum air pressure (1 bar/ 15 psi). Then, fully inflate the
tube chambers up to the maximum air pressure (0.25 bar/ 3.62 psi).
Step 1
Step 1
Step 1
(1)
(2)
(3)
Step 3
Step 3
Step 2
Step 3
(4)
(5)
HIGH PRESSURE
VALVE
