10
2. OUTBOARD MOTOR INSTALLATION
After the boat is fully inflated and well assembled, attach your outboard motor onto the
Engine Mount at the center of the transom.
NOTE:
•
Ensure the motor is always fixed on the transom.
• Read the instruction manual of the outboard motor for correct installation and operation.
WARNING:
Overpowering a boat can result in serious injury, death or boat damage. Do not exceed the
maximum motor power.
ACCESSORY ASSEMBLY
1) Join the two shafts of the oars by snapping them together.
2) There are pre-drilled holes in the middle of the oars so you can slide it over the oar
holder and then secure the oar in place by using the rotation oarlock.
NOTE:
When the oars are not in use, leave the oars in the oar holders to avoid
damage and loss.
1. OAR ASSEMBLY
(1)
(2)
