11
The boat is made of the high quality materials and complies with ISO 6185 standards.
Altering the construction of the boat will endanger your own safety, safety of the
occupants and void the limited warranty!
There is very little that you have to do to keep your boat in good condition for many
years.
• When landing on the shore, carry the boat. Do not tow it on the sand or ground as
damage may occur.
• If you use the towing D-ring to tow the boat, go slowly to avoid over-towing as
damage may occur.
• Clean your boat after a trip to prevent damage from sand, salt water or sun exposure.
Most dirt can be removed with a garden hose, a sponge and mild soap.
• Make sure the boat is completely dry before storing, and remove any excess moisture
that could cause unsightly mildew. Use as few cleaning agents as possible, do not
discharge waste agents into water, and clean your boat preferably on land.
• Choose a cool and dry spot to store the boat. Ensure protection against rodents and
other vermin, as they feed on the fabric of the boat.
• The boat may be stored inflated, but do not place any heavy or sharp objects on it.
Hanging the boat is not recommended.
• If you’re planning to leave your boat outside, make sure to keep it raised up off the
ground. It is also a good idea to keep it covered so that it is not directly exposed to
berries, leaves, rain, sunlight and other elements. Boats that are left in water should
be emptied from time to time.
• Store the product and accessories in a dry place, with temperature controlled
between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees Fahrenheit (40
degrees Celsius).
PRODUCT CARE AND STORAGE
