Copyright © 2020 Aqua Creek Products All Rights Reserved
Revised 7/28/20
Portable Pro Pool 2 Assembly Instructions (Sand Ballast)
USE A LARGE FUNNEL
TO FILL THE TANK WITH
"ALL-PURPOSE" SAND
REMOVE SCREWS &
CAPS FROM BOTH
HOLES TO FILL TANK
BALLAST TANK
FILL THE TANK WITH 650lbs
OF "ALL-PURPOSE" SAND
(13, 50lb BAGS)
WARNING! DO NOT
OPERATE THE LIFT
BEFORE FILLING THE
BALLAST TANK.
!
1. Fill the ballast tank with sand (not included) as shown below. Gently shake or tap the tank
sides periodically to help level the sand. Alternate between fi ll ports to make sure sand is
evenly distributed (use a large funnel to help in this step).
2. Once all the sand has been poured into the tank, return the caps to the top of the tank and
attach them with the screws.
3. With the counter weight now in place, roll the lift to the desired location on the pool deck.
4
