7
8
Skimmer System Installation
5
5
7
1
2
3
4
5
6
5
6
1
2
3
4
5
6
7
5
6
8
Dedicated Vac Line Installation
Before connecting vacuum to hose,
check the current
suction from the pool’s filtration system. Connect the Suction
test gauge #6 to the end of a Flexible hose section #5 with
the gauge below water surface, Turn on pump and examine
gauge setting. Do Not place hand or anything in front of
gauge during this process. This exercise will determine flow
rate of existing pump and if any increase or decrease in water
suction is required. Pool cleaner will work best between level
3 to 6 on the gauge, use the Flow regulator #7 provided to
adjust the initial setting. After installation is completed,
additional adjustment to flow regulator can be made.
See Trouble Shooting Guide on last page.