16
INSTALLING THE HEADREST ASSEMBLY
1] If the HEADREST PAD has not
yet been installed install it first.
The pad height may be adjusted
now, or after the assembly has
been attached to the chair.
Assemble fully as shown in the
diagram to the right.
2] Slide the SUPPORT BRACKET
into the slots on the top of the
chair.
The INTEGRATED HEADREST
ASSEMBLY is now ready to
adjust and use.
NOTE: The INTEGRATED HEADREST ASSEMBLY will work on all 2
nd
generation
18” wide Aqua Creek Products’ chairs*. The 18” chair comes standard on all Aqua Creek
Products’ Scout, Ranger, Pro Pool and Patriot pool lifts.
*(The 2
nd
generation 18” wide chair has the slots for the INTEGRATED HEADREST,
where the 1
st
generation 18” wide chair does not).
