FARBWERK
10.6.
10.6.
10.6.
10.6. Fading effect
Fading effect
Fading effect
Fading effect
For some controller modes, a fading effect can be activated. By defining the eight
points of the effect curve, a pulsating brightness of the corresponding LED output
can be set.
10.7.
10.7.
10.7.
10.7. Sound controlled effects
Sound controlled effects
Sound controlled effects
Sound controlled effects
Sound controlled effects can be used to visualize the current audio output of the
computer. A warning in the LED configuration area will notify you if audio analysis
has been disabled in the aquasuite. In this case, please enable the feature in the
general aquasuite configuration. The general aquasuite configuration can also be
used to modify existing audio filters and define custom audio filters.
10.8.
10.8.
10.8.
10.8. AMBIENTpx effect
AMBIENTpx effect
AMBIENTpx effect
AMBIENTpx effect
The AMBIENTpx effect replicates the border area of the current monitor content on
the configured LEDs. This effect is meant to be used with LED strips installed to the
rear of the monitor for background lighting. A warning in the LED configuration
area will notify you if video analysis has been disabled in the aquasuite. In this
case, please enable the feature in the general aquasuite configuration.
For each configured AMBIENTpx effect, please select the correct monitor, edge
and desktop range to evaluate for the effect.
Prerequisites and limitations:
●
The AMBIENTpx effect requires Microsoft Windows operating system version
8.1 or newer.
●
Screen content preventing analysis by DRM or similar methods cannot be
analyzed.
●
Multi monitor setups must be configured using standard procedures of the
operating system. Special features of the graphics card driver like “NVIDIA
Surround” or “AMD Eyefinity” must be disabled.
●
AMBIENTpx is not available while “NVIDIA G-Sync” is active.
11.
11.
11.
11. Profiles
Profiles
Profiles
Profiles
Select “Profiles” from the device list below the “farbwerk” entry.
The profile management can be used to to save four configurations as
profiles and activate them manually or automatically. Profile manage-
ment is a software feature of the aquasuite and requires a USB connection to the
farbwerk.
11.1.
11.1.
11.1.
11.1. Manual profile selection
Manual profile selection
Manual profile selection
Manual profile selection
Select the profile to be activated by clicking the corresponding button.
- 16 -
Aqua Computer GmbH & Co. KG
© 2014-2020
Gelliehäuser Str. 1, 37130 Gleichen
computer
aqua
