Industrial Exhaust Blower
6
5.1 Available fan support brackets
6 NORMAL USE
The MAXIDRIVE backward inclined blower is designed to remove gases and smoke from the air
resulting from a fabrication process. Each MAXIDRIVE backward inclined fans is built as per the
criteria and information supplied by the customer for a specific application, and should not serve
any other application without the approval of A.Q.C. Inc.
7 OPERATION AND PURPOSE
MAXIDRIVE backward inclined blade fans include impellers which are used to exhaust contaminated
air directly to the outside or through a filtering device. Operating temperatures are 200°F (93°C).
Optional high temperature resistant paint on impellers is available. Explosion proof motors are
recommended when fan is installed in reactive gas environments.
8 COMPONENTS
1.
Housing
2.
Impeller
3.
Motor
4.
Inlet cone
5.
Companion flange (straight pipe or bolted)
6.
Motor support plate
7.
Motor cooling impeller
l
H
B
Roof top mount bracket
(horizontal installation only)
Wall mount bracket (vertical or
horizontal installation)
Drawing #1
WALL MOUNT BRACKET
(VERTICAL OR HORIZONTAL INSTALLATION)
ROOF TOP MOUNT BRACKET
(HORIZONTAL INSTALLATION ONLY)
Figure 1
MAXITUBE
Page | 9
Baghouse Dust Collector
4.
Install a ground wire to the unit
.
5.
Lift t
he filte
r cabinet using the lift lugs. Using spikes, position the cabinet
above the dust storage section making sure to align the cabinet bolt holes
with the dust storage bolt holes.
6.
Lower t
he filte
r cabinet onto the dust storage section and align the bolt holes.
7.
Attach t
he fil
ter cabinet to the dust storage section using the supplied nuts,
washers and bolts. Tighten bolts for an adequate seal.
Figure 3
Support
plates
Support
legs
Cross braces
WARNING
Apply two strips of butyl adhesive on the dust storage section upper
outline. One strip should be applied inward of the bolt holes and one
strip outward of the bolt holes (Figure 4).
Figure 4
WARNING
The use of a spreader is recommended to avoid
d
amages to the filt
er cabinet.
Unside bag
removal
3
7
2
6
1
4
5
