5
WIRING DIAGRAM - COLDWELL CW-13
Pressure Switch
2
4
3
5
1
7
6
Fan
1
2
3
Power
Switch
Compressor
White
Green
Check data
plate for voltage
and frequency
Wire Connector
11961-00 (2 ea.)
Connect to
Compressor Box
Start
Relay
Thermoprotector
OPERATING INSTRUCTIONS
Plug Coldwell in and turn on the power switch. The unit has been calibrated at the factory for 35° F-39° F at
sea level. Wait about 45 to 60 minutes for the unit to cool. If the product is too cold or too warm adjust the
thermostat. The thermostat adjustment is located above the power switch on the compressor housing.
To access the thermostat adjustment remove the hole cover to reveal the flat screw driver adjust shaft.
Turning the screw 1/4 turn clockwise will lower the temperature approximately 6° F . Conversely, turning the
screw 1/4 turn counterclockwise will raise the temperature 5° F . If you are unable to set your Coldwell to the
desired temperature contact your factory authorized service agent for adjustment.
1.
All food service equipment should be operated by trained personnel.
2.
Never hold food below 150°F or above 40°F.
