32
Quality for Professionals
8 Maintenance and care
8.1 General
To maintain the implement in good condition even after a long service life, the following
instructions must be observed:
•
In the supplement "For your safety…" you will find some basic safety regulations
for maintenance work.
•
Original parts and accessories are designed especially for the machines or
implements.
•
Please note that spare parts and accessories not supplied by us have also not
been tested and approved by us.
•
The installation or use of such products can therefore possibly negatively change
or impede the constructional properties of your implement. The manufacturer rules
out any liability for damages resulting from the use of non-original parts and
accessories.
•
The manufacturer is not liable for any unauthorised modifications and the use of
components and auxiliary parts.
•
All bolted connections should be re-tightened at the latest after 3 operating hours
and again after 20 hours, and then checked regularly. (Loose bolts can cause
significant consequential damage, which is not covered by the warranty.)
•
The paint can be damaged by cleaning with excessive pressure.
•
During the winter, the implement should be protected against rust with an
environmentally-friendly product.
•
Park the implement protected from weather conditions.
•
Do not clean the implement with water.
Cleaning the implement with compressed air is recommended.
CAUTION:
Ensure that no water gets into the hopper or the implement. The inside of
the implement can only be cleaned with compressed air! Please cover the suction
channel with the supplied covering plate!
TIP:
Ensure that the cover for the air channel is installed
during storage!
CAUTION:
When using the implement, the cover with the 4 wing nuts must be removed
from the suction channel!
Fig.: 37
