APV GK 250 M1, Руководство по эксплуатации

Страница: 9 / 32

Translation of the original operating manual Page 9

If repairs or maintenance are required on the implement that can only be performed in
conjunction with the towing vehicle, this work must be identified by a clearly visible information
sign "Caution: maintenance work".

Check the nuts and bolts regularly for tight fit and retighten if necessary!

When performing maintenance on the lifted implement, always ensure safety through suitable
support elements!

When changing work tools with sharp edges, always use suitable tools and gloves!

Properly dispose of oils, grease and filters!

Always cut the power supply when working on the electrical system!

When performing electrical welding work on the tractor and mounted implement, disconnect the
cable on the generator and the battery!

Spare parts must at least comply with the technical requirements specified by the implement
manufacturer! This is ensured with original parts!
5.6 Tyres

When working on the tyres, it must be ensured that the implement is safely parked and secured
against rolling away (wheel chocks).

The mounting of wheels and tyres requires sufficient knowledge and proper installation tools.

Repair work on the tyres may only be performed by specialists and with suitable installation
tools.

Check the inflation pressure regularly. Observe the prescribed inflation pressure (2.1 bar)!
5.7 Mounted seeders

When using a seeder, all of the specifications of the implement manufacturer must be observed.

The seeder can be easily reached with using a ladder and platform. They must be clean and dry
during use.

It is strictly forbidden to stand on the platform or its access ladder while driving.

When not in use, the ladder must be folded up and secured.
5.7.1 Filling the seeder

The seeder is filled using a supply vehicle.

The platform kit may not be used to fill the seeder or as a storage area for objects or seed. When
filling the seeder, never stand under a suspended load!

When driving up to the implement with seed, nobody may be standing on or around the
implement.

The platform kit may only be accessed to open the seed sacks when the load has been
stabilised above the opening of the seed hopper.

During the loading procedure, avoid any contact with the treated seed and wear gloves, a dust
mask and safety glasses.
CAUTION!
Misprints, errors and omissions excepted!