24
Original operating manual ES 100 M1 Classic
Quality for Professionals
Clartex Neo
Slug-off
,
Working width
12.0 m
15.0 m
20.0 m
24.0 m
Speed
5 – 6
7 – 8
8 – 9
9 – 9
Forward speed km/h
10
15
20
10
15
20
10
15
20
10
15
20
Slider opening
5 kg/ha
2.5
4
4.5 3.2 3.8 4.2 3.5 4.1 4.9 3.7 4.5 5.5
TIP:
It can be sensible to check the settings for the spread rate from time to time.
With large working widths, the wind velocity should be observed to prevent spreading
errors.
NOTE
: The slider is only opened when the spreading plate is rotating!
The maximum working width depends on the battery voltage too!
11 Error messages
The error message codes were created to monitor proper operation of the implement
and to inform the user if proper operating of the implement is no longer possible.
Problem
Cause
Possible remedy
"
b
" Battery error flashes
on the display.
The slider will be closed
and the motor switched
off.
The implement cannot be
operated.
The operating voltage is
too low or fluctuates too
much
Check the on-board
electronics and the
battery.
CAUTION:
if your battery is
charged by a charger that
is in "Start" operating
mode, this may lead to
voltage peaks! This can
cause damage to the
implement!
Disconnect the charger,
check the on-board
electronics and the
battery.
"
E
" Error flashes on the
display.
Motor cable break
Check the cable routing
and the motion of the
spreading disc.
Motor blocked (=stiff)
Check the cable routing
and the motion of the
spreading disc.
