13
Figure 4: AS 600 M1
Figure 5: AS 900 M1 rigid
With hydraulic folding, the securing chain must be hooked onto the side wings and also lock the stop tap
(if equipped), which is located on the folding cylinder. Then the pressure in the hydraulic hoses to the
tractor must be relieved.
Figure 6: Front parking supports
Figure 7: Rear parking support
8.5
SAFE PARKING AS 900 M1 SCISSORS FOLDING / AS 1200 M1
To ensure safe parking for the implement versions AS 900 M1 scissors folding and AS 1200 M1 as well,
the two rear parking supports on these versions must be taken out of the holders (Figure 8) and pushed
into the hollow profile with the hole (Figure 8). The required height is selected using the pattern of holes
on the outrigger, and pegged using pins. The pins are secured against unintentional loosening with a
spring cotter.
Just like for the above-mentioned implement versions, the parking area must be suitable for parking the
implement, i.e. have a firm and level surface so that the stands do not sink in and the weeder does not roll
away.
Moreover, when parking the implement, it must be ensured that the two inner feeler wheels have sufficient
tyre pressure (max. 3.4 bar), so that they do not develop flat tyres while they are parked.
With hydraulic folding, the securing chain must be hooked onto the side wings and also lock the stop tap
(if equipped), which is located on the folding cylinder. Then the pressure in the hydraulic hoses to the
tractor must be relieved.
Содержание AS 1200 M1
Страница 30: ...30 NOTES ...
Страница 31: ...31 NOTES ...
Страница 32: ...APV Technische Produkte GmbH Zentrale Dallein 15 AT 3753 Hötzelsdorf Tel 43 2913 8001 office apv at www apv at ...
