APstorage Installation / User Manual
10
3. Installation
3.3 PCS Installation Steps
①
Mark the holes position on the wall and drill holes according to wall type and expansion screws
type.The configured expansion screw is drilled with a diameter of 12mm and a depth of
50-55mm.
②
Put the expansion screws into the holes on the wall. Use a wrench to tighten the hex nuts, so
that the expansion screws sleeve are fully expanded. Then remove the hex nuts. Hang the wall
mounting bracket into the expansion screws, and use the hex nuts to fix it firmly. Make sure
that the wall mounting bracket is horizontal after installation.
③
Lift the PCS hang it into the wall mounting bracket, and fix the PCS on wall mounting bracket
with the M6
×
14mm screw.
M6
×
14 screw
