APS LSC, Инструкция по установке и эксплуатации

Страница: 12 / 16

12
LSC
Relay Module RM
Application & Characteristics
The Relay Module RM provides 8 potential free contacts which could be used to build an
external signalising or switch other devices. The BM Basic Module is supplied in the
installation housing for top-hat rail mounting.
o
8-channel relay module
o
Contact load carrying up to 250 VAC / 3 A per relay output
o
Normally open or normally closed current principles
o
Expandable up to 64 relay outputs (NO/NC)
o
LED indicator per relay
o
Function of relay outputs conforming to DIN 19235
o
CAN Bus interface for networking (BUS coupling)
o
Integrated lamp test button
o
Built in LED showing the status of the supply voltage and the bus function
Function:
The control of the Relay Module RM is effected via the internal BUS. Optionally, the alarm
inputs can be linked with the individual outputs of the Relay Module (OR–linking of the alarm
inputs).
Button lamp test
All LED are activated for appr. five seconds.
Outputs in “BLINK” mode are activated too
Technical data:
Housing 87x90x58mm
Mounting positon Any
Connections Cage Clamp 2,5mm2
Permissible ambient temperature 0°C bis + 55°C
Protection degree IP20
Supply voltage 24VDC +/- 20%
Signal voltage 24VDC (15-30 VDC)
Flashing frequency 1Hz
Max. load of the relay contacts Max. 3A/250VDC
Mechanical relay life span 10
7
switching cycles
Max. power consumption 4W
Weight 220g