CHAPTER 1
INTRODUCTION
Entire Contents Copyright
2006 by Adaptive Power Systems, Inc. (APSI) • All Rights Reserved • No reproduction without written authorization from A
PSI.
FC200 SERIES
OPERATIONS MANUAL
1 - 9
FC200-000-02.2
Storage and Transportation
Packing Instructions
Please retain all the original packing materials. If the equipment must be sent back for
repair, use the original packing materials for packing. Please contact the APS repair
center or factory before returning equipment. Be sure to send all accessories and
indicate the symptoms and cause of failure if known.
Other packing Material
If the original packing material is missing, please follow the instructions below:
Wrap the equipment in PU (polyurethane) foam or Styrofoam.
The equipment must be protected by shock-resistant material, about 70 to 100mm
thick (3 to 4 inches).
The front panel must be protected with cardboard.
Secure packing tightly and insert unit into a wooden crate if possible.
Label the box “fragile” and transport carefully.
Non-Operating Environment
The
FC200
Series Frequency Converter can be stored and transported under the
following environment:
Temperature: –40
°
C - 55
°
C ( –40
°
F - 131
°
F)
Altitude: 7,620 meters (25,000 feet)
Avoid sudden temperature changes. Sudden changes in temperature may result in
condensation inside the equipment.
