APRILIA Tuono V4 1100 2021, Руководство пользователя

Страница: 131 / 214

•
The damping, compression, rear extension, braking and turning acceleration
assistance are electronically adjusted.
To perform these adjustments, refer to paragraph "ADVANCED FUNCTIONS" in the
"VEHICLE" chapter.
Each adjustment is described in detail at paragraph "a-PRC SYSTEM", under the
"ASC" section
03_12
Tuono V4 1100 (Sachs fork)
The left stem is equipped with:
•
An upper adjustment screw (1) to set the hydraulic rebound braking;
•
An upper nut (3) to adjust the spring preload;
The right stem is equipped with:
•
An upper adjustment screw (2) to set the hydraulic compression braking;
•
An upper nut (3) to adjust the spring preload;
TO AVOID DAMAGE, DO NOT FORCE THE ADJUSTERS BEYOND THE MAXI-
MUM SETTING POSITION IN EITHER DIRECTION. SET THE SAME SPRING PRE-
LOAD AND HYDRAULIC DAMPING SETTING FOR BOTH STANCHIONS: RIDING
THE VEHICLE WITH DIFFERENT SETTINGS FOR THE TWO STANCHIONS RE-
DUCES STABILITY. WHEN SPRING PRE-LOAD IS INCREASED, REBOUND
DAMPING MUST ALSO BE INCREASED TO PREVENT EXCESSIVE SUSPEN-
SION KICKBACK WHEN RIDING.
The standard front fork setting is adjusted to suit most high and low speed riding con-
ditions, whether the vehicle is partially or fully loaded.
However, the setting can be modified for specific needs according to vehicle use.
131
3 Use