APRILIA SCARABEO 50 I.E-100 4T - 2001, Руководство по ремонту, Страница: 59 / 110

Release 00 2003-02
58
Scarabeo 50 I.E.-50/100 4T
CHECKING
♦
Before reassembly, check the condition of the following
parts, and if in any way damaged, replace them:
– washer (6);
– bearings (12);
– speedometer drive (5);
– spacer (13);
– brake disc (14), [(minimum thickness 3.5 mm (0.138 in)];
– front axle (4);
Riding with damaged rims is dangerous for the rider,
the vehicle and other people.
Check the conditions of the wheel rim and the tire; if in
any way damaged, replace them.
– wheel rim (15) see p. 55 (INSPECTING THE WHEELS);
– tire (16), see p. 55 (TIRES).
♦
Further, check the brake pad wear, see p. 50 (CHECK-
ING WEAR OF THE BRAKE PADS).
REASSEMBLY
Carefully read p. 2 (GENERAL SAFETY RULES).
A dirty disc soils the pads, with consequent reduction
of the braking efficiency. Dirty pads must be replaced,
while dirty discs must be cleaned with a high-quality
degreaser.
Before carrying out the following operations, let the
engine and the exhaust silencer cool down until they
reach room temperature, in order to avoid burns.
♦
Apply a thin film of lubricating grease, see p. 13 (LUBRI-
CANT CHART) to the:
- inside of the speedometer drive (5);
- outer seats of the wheel hub;
- front axle (4).
♦
Position the wheel on the support (2) between the fork
legs.
♦
Position the tang (9) of the speedometer drive in the
appropriate seat on the wheel hub.
While reassembling the wheel, be careful not to
damage the brake line, the disc and the pads.
WARNING
WARNING
CAUTION
100