APRILIA SCARABEO 50 I.E-100 4T - 2001, Руководство по ремонту

Страница: 26 / 110

Release 00 2003-02
25
Scarabeo 50 I.E.-50/100 4T
1
2
6
3
4
5
8
7
REMOVING THE FRONT COVER
Carefully read p. 2 (GENERAL SAFETY RULES).
♦
Place the vehicle on the center stand.
♦
Unscrew and remove the one screw (1).
Proceed with care.
Do not damage the tabs and/or the slots in which
they fit.
Handle the plastic and painted components with care
and avoid scraping or damaging them.
♦
Remove the front cover (2), by pulling it downwards.
REMOVING THE FRONT INNER SHIELD
Carefully read p. 2 (GENERAL SAFETY RULES).
NOTE
Remove the key from the ignition switch.
♦
Remove the footboard, see p. 24 (REMOVING THE
FOOTBOARD).
♦
Remove the lower shield, see p. 24 (REMOVING THE
LOWER SHIELD).
♦
Remove the rubber gasket (3) from the ignition switch.
♦
Unscrew and remove the two screws (4).
♦
Open the cover (5) of the glove compartment.
♦
Unscrew and remove the screw (6).
♦
Remove the front cover, see above (REMOVING THE
FRONT COVER).
♦
Unscrew and remove the two screws (7).
♦
Press the sides of the front outer shield in correspond-
ence with the arrows (A), (B), (C), and pull it, releasing
the tabs from their slots.
Proceed with care.
Do not damage the tabs and/or the slots in which
they fit.
Handle the plastic and painted components with care
and avoid scraping or damaging them.
♦
Remove the front inner shield (8).
NOTE
Upon reassembly, make sure that the tabs are
correctly inserted.
CAUTION
CAUTION