APRILIA SCARABEO 100 - Скачать руководство пользователя страница 25

Страница: 25 / 96

use and maintenance

Scarabeo 50 - Scarabeo 100

#2!3( (%,-%4 #!3%

NOTE

The crash helmet case is sup-

plied as standard equipment only with ver-
sion

Two keys are supplied together with the
vehicle (one spare key).

NOTE

Do not keep the spare key on the

vehicle.

NOTE

The case can contain one crash

helmet.

WARNING

Do not overload the crash helmet case.

Maximum allowed weight: 3 kg

Thanks to the crash helmet case, you
needn’t carry the helmet or other encum-
bering objects with you every time you park
the vehicle. To reach the crash helmet
case, proceed as follows:

NOTE

It is possible to remove the crash

helmet case from the vehicle and to use it
as hand luggage, see p. 65 (REMOVING
THE CRASH HELMET CASE

To reach the crash helmet case, pro-
ceed as follows:

◆

Introduce the key (1) in the lock.

◆

Turn the key (1) clockwise.

◆

Raise the lock body (2) and release it
from the cover coupling (3).

◆

Open the crash helmet case.

Содержание SCARABEO 100 -

































































































Результаты поиска

Содержание SCARABEO 100 -

Отзывы:

APRILIA SCARABEO 100 -, Руководство пользователя, Страница: 25 / 96

Результаты поиска

Содержание SCARABEO 100 -

Отзывы: