background image

31

use and maintenance   

RSV mille TUONO 

7

- RSV mille R TUONO 

7

handlebars, fenders, or forks, because this
will upset the handling of your vehicle, and
could prevent you from avoiding an
accident. Failure to heed this warning can
lead to an upset with subsequent serious
injury or even death.

Do not ride with your crash helmet hung
from the strap because it could easily foul
the wheels, fenders, or forks, causing an
upset and subsequent serious injury or
even death.

Carry a passenger only if your vehicle is
e qu i p p e d  w i t h   p a s s e n ge r   f oo t r e s t s ,
handgrips for the passenger to hold on to,
and a passenger saddle.

When carrying a passenger, remember that
your vehicle’s handling is degraded, that the
brakes are less efficient, and the center of
gravity is higher and further to the rear.

This makes it more likely that the front
w h e e l   w i l l   c o m e   u p   o f f   t h e   g r o u n d ,

especially on acceleration. Therefore, you
should avoid hard acceleration and hard
braking. Many accidents are caused by
inexperienced riders carrying passengers.
Remember that allowance must be made
for the extra weight of the passenger for all
driving maneuvers.

Avoid abrupt and excessive acceleration.
Always slow down in time and calculate
l o n g e r   s t o p p i n g   a n d   m a n o e u v r i n g
distances. Non-compliance with these
instructions may lead to the overturning of
the vehicle or to other accidents with
consequent serious injuries or even death.

Never carry loosely packaged items, make
sure that everything that you carry on your
vehicle is carefully secured.

Do not carry packages which protrude from
the luggage rack or which cover any of the
signal lights, the headlight, or the horn.

Never carry animals or children on the
glove compartment or on the luggage rack.

Never exceed the labeled maximum load
for each saddlebag.

Overloading your vehicle seriously reduces
its stability and maneuverability and can
lead to an upset with subsequent serious
injury or death.

KG!

Содержание RSV mille R TUONO



























































































































































Отзывы: