APRILIA RSV mille R TUONO, Руководство пользователя

Страница: 40 / 154

40
use and maintenance RSV mille TUONO
7
- RSV mille R TUONO
7
MULTIFUNCTION COMPUTER
When the ignition key (1) is rotated to
position “
”, the following warning lights
come on on the dashboard:
– red line warning light LED “ max ” (2);
– red engine oil pressure warning light LED
“ ” (3), which remains on until the engine
starts.
The pointer (4) of the revolution counter
shifts to the maximum value (rpm) set by
the user. After about three seconds the
red line warning light LED "
max " (2) goes
off; the pointer (4) of the revolution counter
returns to its initial position.
The writing "
EFI
" (5) appears on the right
side of the multifunction display for three
seconds. In this way the component
operation is tested.
After the first 625 mi (1000 km) and
successively every 4687 mi (7500 km), the
writing “SERVICE” (5a) appears on the
right display. In this case contact an
aprilia Official Dealer, who will carry out
the operations indicated in the regular
se rv i ce i n t er v al s ch a rt , s e e p . 8 5
( R E G U LA R S E R V I C E I N T E R V A L S
CHART). To make the writing “SERVICE”
disappear, press the “LAP” push button
(6) and then the push button
O
and keep
them pressed for about five seconds.
With the ignition key (1) in position " " the
standard settings on the dashboard are the
following:
R i g h t d i s p l a y : C l o c k ( 7 ) , c o o l a n t
temperature in °C (8).
Left display : Instantaneous speed in
km/h (9), trip 1 (trip odometer) (10), total
kilometres/miles odometer (11).
Upon installation of the battery or of the
30A main fuses:
– the revolution counter pointer (4) makes
twelve clockwise clicks, thus checking the
operation of the revolution counter itself;
– the instantaneous, maximum and average
speed function is set in “ km/h ”;
– the coolant temperature is set in °C;
– the digital clock is set to zero;
– the red line is set at 6000 rpm, indicated by
the coming on of the red line warning light
LED “
max ” (red) (2).
N O T E
I f n e c e s s a r y , c a r r y o u t t h e
appropriate adjustments.
SEGMENT OPERATION CHECK
◆
Press the push buttons I and H at the
same time.
◆
Rotate the ignition key (1) from position
“
” to position “ ”.
All the segments (13) (13a) will remain on until
the push buttons
I
and
H
are released.
SWITCHING FROM km TO mi (from km/h
to MP H) AN D VICEV ERSA (LE FT
DISPLAY)
◆
Press the push button
I
until, after
about five seconds, all the writings (12)
on the left display start blinking.
◆
Release the push button I .