APRILIA RST MILLE FUTURA - PART 2 2000 Скачать руководство пользователя страница 45

Страница: 45 / 50

103

use and maintenance RSV mille - RSV mille R

PARKING LIGHT BULB

◆

Remove the front part of the fairing, see
p. 79 (REMOVING THE FRONT PART
OF THE FAIRING).

CAUTION

To extract the bulb socket, do not pull
the electric wires.

◆

Grasp the parking light bulb socket (8),
pull it and remove it from its seat.

◆

Withdraw the bulb (2) and replace it with
one of the same type.

NOTE

Make sure that the bulb is cor-

rectly inserted in the bulb socket.

LOW BEAM BULB

NOTE

Extract the connectors one by

one, in such a way as to avoid positioning
them wrongly upon reassembly.

If it is necessary to remove all the connec-
tors at the same time, mark them and
make sure that you position them correctly
upon reassembly.

◆

Remove the front part of the fairing, see
p. 79 (REMOVING THE FRONT PART
OF THE FAIRING).

◆

Move the protection element (9) with
your hands.

CAUTION

To extract the bulb electric connector,
do not pull its wires.

◆

Grasp the bulb electric connector (10),
pull it and disconnect it from the bulb.

◆

Release the two ends of the check
spring (11) positioned on the bulb socket
(12).

◆

Extract the bulb from its seat.

NOTE

Insert the bulb in the bulb socket,

making the respective positioning seats (A)
coincide.

◆

Correctly install a new bulb of the same
type.

Upon reassembly:

NOTE

Put back the protection element

(9) with the cable passage facing down-
wards.

RSVmille-R-UK.book Page 103 Friday, November 17, 2000 3:13 PM

Содержание RST MILLE FUTURA - PART 2 2000



















































Результаты поиска

Содержание RST MILLE FUTURA - PART 2 2000

Отзывы:

Похожие инструкции для RST MILLE FUTURA - PART 2 2000

Бренды по названию

Популярные бренды

APRILIA RST MILLE FUTURA - PART 2 2000, Руководство пользователя

Результаты поиска

Содержание RST MILLE FUTURA - PART 2 2000

Отзывы:

Похожие инструкции для RST MILLE FUTURA - PART 2 2000

Бренды по названию

Популярные бренды