APRILIA RST MILLE FUTURA - PART 2 2000 Скачать руководство пользователя страница 32

Страница: 32 / 50

use and maintenance RSV mille - RSV mille R

30!2+ 0,5'3

Carefully read p. 59 (MAINTENANCE).

NOTE

Perform the maintenance opera-

tions with doubled frequency if the vehicle
is used in rainy or dusty areas, on uneven
surfaces or on racetracks.

CAUTION

Check, clean or change all the spark
plugs, one by one.

Check the spark plugs every 7500 km
(4687 mi), change them every 15000 km
(9375 mi).

In case of use on racetracks, change the
spark plugs every 3750 km (2343 mi).

Periodically remove the spark plugs and
clean them carefully, removing carbon de-
posits; change them if necessary.

CAUTION

Even if only one spark plug needs
changing, always replace all of them.

To reach the spark plugs:

WARNING

Before carrying out the following opera-
tions, let the engine and the silencer
cool down until they reach room tem-
perature, in order to avoid burns.

◆

Lift the fuel tank, see p. 76 (LIFTING
THE FUEL TANK)

NOTE

The vehicle is equipped with two

spark plugs per cylinder (A) and (B).

The following operations refer to the two
spark plugs of one cylinder, but are valid
for both cylinders.

CAUTION

Carry out all the operations indicated on

the first spark plug and then repeat
them on the second spark plug of the
same cylinder.

For the removal, proceed as follows:

CAUTION

Do not invert the position of the two
spark plug caps.
Do not remove the two spark plug caps
at the same time.

◆

Remove the cap (1) of the spark plug (2).

◆

Remove any trace of dirt from the spark
plug base.

◆

Introduce the special spanner provided
in the tool kit on the spark plug.

◆

Insert the 13 mm fork spanner provided
in the tool kit in the hexagonal seat of the
spark plug spanner.

◆

Unscrew the spark plug and extract it
from its seat, taking care to prevent dust
or other substances from getting inside
the cylinder.

RSVmille-R-UK.book Page 90 Friday, November 17, 2000 3:13 PM

Содержание RST MILLE FUTURA - PART 2 2000



















































Результаты поиска

Содержание RST MILLE FUTURA - PART 2 2000

Отзывы:

Похожие инструкции для RST MILLE FUTURA - PART 2 2000

Бренды по названию

Популярные бренды

APRILIA RST MILLE FUTURA - PART 2 2000, Руководство пользователя

Результаты поиска

Содержание RST MILLE FUTURA - PART 2 2000

Отзывы:

Похожие инструкции для RST MILLE FUTURA - PART 2 2000

Бренды по названию

Популярные бренды