APRILIA mille SL Скачать руководство пользователя

Страница: 26 / 96

use and maintenance

SL mille

)'.)4)/. 37)4#(

The ignition switch (1) is positioned on the
upper plate of the steering column.

NOTE

The key operates the ignition

switch/steering lock, the fuel tank lock and
the glove/tool kit compartment lock.
Two keys are supplied together with the
vehicle (one spare key).

NOTE

Do not keep the spare key on the

vehicle.

34%%2).' ,/#+

WARNING

Never turn the key to position “

” in

running conditions, in order to avoid
losing control of the vehicle.

OPERATION

To lock the steering:

◆

Turn the handlebar completely leftwards.

◆

Turn the key to position “

”.

◆

Press the key and rotate it to position “

”.

◆

Extract the key.

Position

Function

Key

removal

Steering

lock

The steer-
ing is
locked.
It is neither
possible to
start the
engine, nor
to switch on
the lights.

It is possi-
ble to
remove the
key.

Neither the
engine, nor
the lights
can be
switched on.

It is possi-
ble to
remove the
key.

The engine
and the
lights can be
switched on.

It is not pos-
sible to
remove the
key.

Содержание mille SL

































































































Результаты поиска

Содержание mille SL

Отзывы:

Похожие инструкции для mille SL

Бренды по названию

Популярные бренды

APRILIA mille SL, Руководство пользователя

Результаты поиска

Содержание mille SL

Отзывы:

Похожие инструкции для mille SL

Бренды по названию

Популярные бренды