APRILIA mille SL Скачать руководство пользователя | Manualshive

Страница: 61 / 96

background image

61

use and maintenance

SL mille

REASSEMBLY

Carefully read p. 51 (MAINTENANCE).

a

CAUTION

While reassembling the wheel, be care-
ful not to damage the brake pipes, discs
and pads.
The arrow on  the wheel side indicates
the  rotation direction.  Upon  reassem-
bly, make  sure  that  the  wheel  is posi-
tioned correctly: the arrow must be visi-
ble on the left side of the vehicle.

◆

Spread a film of lubricating grease on the
whole length of the wheel pin (7), see
p. 90 (LUBRICANT CHART).

◆

If the left spacer ring (8) has come out of
its seat on the wheel during disassembly,
correctly position it there.

◆

Position the wheel between the fork rods
on the support (6).

a

WARNING

Danger of injury.
Do not introduce your fingers to align
the holes.

◆

Move the wheel until its central hole and
the holes on the fork are aligned.

◆

Introduce the wheel pin (7) completely.

◆

Position the washer and tighten the nut
(4) manually.

◆

Lock the rotation of the wheel pin (7).

◆

Tighten the nut (4) completely.

Wheel nut (4) driving torque:
80 Nm (8 kgm).

a

CAUTION

Proceed with care, in order not to dam-
age the brake pads.

◆

★

Insert the brake caliper (2) on the disc

and position it so that its fastening holes
and the holes on the support are aligned.

a

WARNING

Upon reassembly of the brake caliper,
replace the caliper fastening screws (1)
with two new screws of the same type.

◆

★

Screw and tighten the two screws (1)

that fasten the brake caliper.

Brake caliper screw (1) driving torque:
50 Nm (5 kgm).

◆

With pulled front brake lever, press the
handlebar repeatedly, thrusting the fork
downwards. In this way the fork rods will
settle properly.

◆

★

Tighten the two screws (5) of the

wheel pin clamp.

Wheel pin clamp screw (5) driving
torque: 22 Nm (2,2 kgm).

◆

Make sure that the following components
are not dirty:
– tyre;
– wheel;
– brake discs.

a

WARNING

After reassembly, pull the front brake le-
ver repeatedly and check the correct
functioning of the braking system.

Check the wheel centering.

Have the driving torques, centering and
balancing of the wheel checked by your

APRILIA

Official Dealer, in order to avoid

accidents that may be harmful for you
and/or other people.

«
...
59
60
61
62
63
...
»

Содержание mille SL

































































































Отзывы:

Нет отзывов

Похожие инструкции для mille SL

Бренд: GAS GAS Страницы: 74

Daytona Moto2 765 2020

Бренд: Triumph Страницы: 163

Бренд: Dakota Digital Страницы: 2

Бренд: X-lite Страницы: 84

Бренд: Insportline Страницы: 19

Бренд: Honda Страницы: 143

Бренд: Yamaha Страницы: 98

Star XVS13CB(C)

Бренд: Yamaha Страницы: 100

Бренд: Yamaha Страницы: 96

Бренд: Yamaha Страницы: 145

ROADLINER XV19SW

Бренд: Yamaha Страницы: 444

Бренд: Yamaha Страницы: 494

Бренд: Yamaha Страницы: 94

Бренд: Honda Страницы: 4

Бренд: TVS Страницы: 48

Бренд: Honeywell Страницы: 93

Бренд: Royal Enfield Страницы: 110

Бренд: Shad Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды