APRILIA Habana 125 Скачать руководство пользователя

Страница: 40 / 104

use and maintenance Habana 50/125 - Habana Custom 50/125

w v

For the first 500 km (312 mi), keep to the
following indications:

◆

0-100 km (0-62 mi)

During the first 100 km (62 mi), put on the
brakes with caution and avoid sharp and
prolonged brakings. This ensures the cor-
rect bedding-in of the friction material of
the pads on the brake disc and of the
shoes on the rear wheel drum.

◆

0-300 km (0-187 mi)

Do not keep the throttle grip open more
than one half for long stretches.

◆

300-500 km (187-312 mi)

Do not keep the throttle grip open more
than three-fourths for long stretches.

x u

Keep to the following indications:

◆

Do not open the throttle completely if the
speed is low, both during and after the
running-in.

◆

0-100 km (0-62 mi)

◆

0-300 km (0-187 mi)

Do not keep the throttle grip open more
than one half for long stretches.

◆

500-1000 km (312-625 mi)
During the first 1000 km (625 mi), do not
exceed the 80% of the maximum allowed
speed.

◆

Avoid driving at constant speed for long
distances.

◆

After the first 1000 km (625 mi), progres-
sively increase the speed until reaching
the highest performance levels.

34/00).'

WARNING

If possible, avoid stopping abruptly,
slowing down suddenly and braking at
the last moment.

◆

Release the throttle grip (Pos. A) and
gradually put on the brakes to stop the
vehicle.

◆

In case of a brief stop, keep at least one
brake on.

Содержание Habana 125









































































































Результаты поиска

Содержание Habana 125

Отзывы:

Похожие инструкции для Habana 125

Бренды по названию

Популярные бренды

APRILIA Habana 125, Руководство пользователя

Результаты поиска

Содержание Habana 125

Отзывы:

Похожие инструкции для Habana 125

Бренды по названию

Популярные бренды