APRILIA DORSODURO 900 2018, Руководство пользователя

Страница: 136 / 160

04_28
04_29
To remove dirt and mud accumulated on painted surfaces, wet the soiled areas thor-
oughly with a low-pressure water jet, then remove dirt and mud with a soft car body
sponge soaked abundantly in a solution of car body shampoo in water (2 - 4% sham-
poo dissolved in water). Then rinse with plenty of water, and dry with a chamois
leather. To clean the engine outer parts, use degreasing detergent, brushes and old
cloths. Wash anodised or painted aluminium parts with neutral soap and water. Using
aggressive detergents may damage the surface treatment of these components.
TO CLEAN THE HEADLIGHTS USE A SPONGE SOAKED IN WATER AND MILD
DETERGENT, RUBBING THE SURFACE GENTLY AND RINSING FREQUENTLY
WITH PLENTY OF WATER. REMEMBER TO CLEAN THE VEHICLE CAREFULLY
BEFORE APPLYING SILICON WAX POLISH. DO NOT POLISH MATT-PAINTED
SURFACES WITH POLISHING PASTE. THE VEHICLE SHOULD NEVER BE
WASHED IN DIRECT SUNLIGHT, ESPECIALLY DURING SUMMER, OR WITH THE
BODYWORK STILL HOT AS THE CAR SHAMPOO CAN DAMAGE THE PAINT-
WORK IF IT DRIES BEFORE BEING RINSED OFF.
CAUTION
NEVER USE CLOTHS SOAKED IN PETROL, DIESEL OIL OR KEROSENE FOR
CLEANING THE PAINTED OR PLASTIC SURFACES SO AS NOT TO DAMAGE
THE LUSTRE FINISH OR ALTER THE MECHANICAL PROPERTIES.
CAUTION
DO NOT USE WATER (OR LIQUIDS) AT TEMPERATURES OVER 40°C (104°F)
WHEN CLEANING THE VEHICLE PLASTIC PARTS. DO NOT AIM HIGH PRES-
SURE AIR/WATER JETS OR STEAM JETS DIRECTLY ON THESE COMPO-
NENTS. DO NOT USE ALCOHOL OR SOLVENTS TO CLEAN ANY RUBBER OR
PLASTIC SADDLE COMPONENTS USE WATER AND MILD SOAP.
136
4 Maintenance