APRILIA Classic 125 Скачать руководство пользователя страница 39

Страница: 39 / 64

use and maintenance

Classic 125

2%!2 7(%%, &IG

DISASSEMBLY

Carefully read page 32 (MAINTENANCE).

For the disassembly of the rear wheel, pro-
ceed as follows:

◆

Lift the rear part of the vehicle, placing a
suitable support under the engine, so
that the rear wheel can rotate freely and
the vehicle cannot fall down.

◆

Unscrew and remove the brake adjuster
(1) and release the brake cable (2) from
the pin (3) and from the retainer (4).

◆

Unscrew and remove the nut (5) and re-
lease the rod (6) from the antirotation
pin.

◆

Unscrew and remove the nut (7) and
take the washer (8).

◆

Withdraw the wheel p in from the chain
side.

◆

Release the gearing chain from the
crown, pushing the rear hweel forwards.

◆

Withdraw the wheel from the rear fork.

REASSEMBLY

Carefully read p. 32 (MAINTENANCE).

For the reassembly of the rear wheel, pro-
ceed as follows:

◆

Position the wheel between the rear fork
rods.

◆

Push the wheel forwards and position
the gearing chain in its seat.

◆

Correctly position the hole of the rod (6)
in correspondence with the antirotation
pin and manually screw the nut (5), with-
out tightening it.

◆

Insert the wheel pin.

◆

Insert the washer (8).

◆

Screw the nut (7) until the wheel pin sets
in its seat.

◆

Check the chain tension and if necessary
adjust it, see p. 34 (CHAIN).

◆

Tighten the nut (7).

Nut driving torque: 100 Nm (10 kgm).

◆

Tighten the nut (5).

◆

Insert the brake cable (2) in the retainer
(4) and in the pin (3).

◆

Screw the brake adjuster (1).

◆

Check the rear brake adjustment, see p.
22 (ADJUSTING THE REAR BRAKE).

After reassembly, pull the rear
b r a k e l e v e r r e p e a t e d l y a n d
check the correct functioning of

the braking system.

Check the wheel centering.

Have the driving torques, centering and
balancing of the wheel checked by your

APRILIA

Official Dealer, in order to avoid

accidents that may be harmful for you
and/or other people.

Fig. 35

Содержание Classic 125

































































Результаты поиска

Содержание Classic 125

Отзывы:

Бренды по названию

Популярные бренды

APRILIA Classic 125, Руководство пользователя

Результаты поиска

Содержание Classic 125

Отзывы:

Бренды по названию

Популярные бренды