9
In order to receive TV programs, signal should be
received from one of the following signal sources:
Outdoor antenna.
Cable TV network.
Satellite broadcast network
1.In these three cases, the input cable of antenna or
TV network should be plugged in the 75 Ohm coaxial
cable jack at the rear side of the LCD TV.
2.
When installing the LCD TV , qualified 75 Ohm coaxial
Cable must be used. If other coaxial cable is used,
there may be noise and image disturbances.
Indoor antenna is NOT recommended for this TV
In order to receive digital TV programs, a digital TV
STB must be connected to the rear of the LCD TV.
Connect the coaxial cable connector to
The output terminal.
The antenna input terminal.
For further instruction refer to the receiver instruction
manual
Connecting digital TV Set Top Box
Connecting to antenna or TV radio network
Cable TV network
Or
The rear of the LCD TV
RF(75 )
The
of the LCD TV
must be used
Video
Audio
L
R
Digital TV receiver
RF(75 )
POWER:
Power on/off button; press once to turn the TV on and press again to turn the TV off.
MTS:
Multi-sound mode button.
SLEEP:
Scheduled power off time button, which allows the customer to set the TV power off time according to the
preset times displayed.
MUTE:
Mute button, press once to disable the speaker and press again to enable the speaker.
ASPECT:
Picture size scale button, which allows the customer to scale the picture between different sizes.
P.MODE:
Picture mode button of TV, which allows customer to select different picture modes.
S.MODE:
Sound mode button of TV, which allows customer to select different sound modes.
INFO:
Display the information of current source.
SOURCE:
Signal source selection button, which allows the user to select the signal source input
(TV/AV1/ AV2/AV3 /S-VIDEO/YPBPR1/YPBPR2/PC/HDMI1/HDMI2/HDMI3).
MENU:
Press to display the OSD menu or return up menu.
EXIT:
To return to the screen.
OK:
To confirm the choice with the highlighted menu item. To display the channel list in the no-menu
state.
0,1~9:
TV channel selection button, which allows the customer to select the channel.
-/--:
Channel setup button.
:
Channel revert button of TV, which allows the customer to watch the last TV channel.
CC:
Close caption select button.
V-CHIP:
V-CHIP Function select button.
/
(UP/Down):
Up and down button of OSD menu. To change the OSD menu items and to increase
or decrease the channel.
/
(Left/Right):
Left and right button of the OSD menu. To select the OSD menu items and to
increase or decrease the volume.
VOL+/-:
Volume adjusting button, to increase or decrease the volume.
CH
/
:
Channel selection button, to increase or decrease channel.
Application instruction of remote control
8
Содержание AD32LCDG80
Страница 1: ...AD32LCDG80...
Страница 18: ......
