Apricus tempermate, Инструкция для владельца и по установке

Страница: 11 / 43

11
HYDRAULIC CHARACTERISTICS
MODEL
MINIMUM
FLOW
MAX NOMINAL
FLOW
MAX RATED
FLOW
CONNECTIONS
AT80 4 60 80 25 INLET / 32 OUTLET
AT160 8 120 160 32 INLET / 40 OUTLET
AT240 12 180 240 40 INLET / 50 OUTLET
AT320 16 240 320 40 INLET / 50 OUTLET
The system must be sized taking into account the current legislation with regard to the nominal flow
rate of each outlet. The reference is AS/NZS 3500.1.
Note that the Apricus Tempermate systems should be sized on maximum nominal flows. Pipe
dimensions are based on velocities of 1.5m/s and the valves not exceeding the recommended
maximum differential pressure of 150kPa. The warm water system may exceed nominal flow rates
up to the maximum flows as shown in the table for short periods, but these flows should not be used
for system sizing purposes.