Apricum UIMip, Документация, Страница: 4 / 18

UIM ip - TAD
4 / 19 02.03.2017
3 A
PRICUM
UIM ip H
IGHLIGHTS

The UIM ip works without external power supply.
Picture 2: Connection diagram

The UIM ip is one of the rare KNX IP interfaces on the market
that supports the extended frame format and long telegrams up to 240 bytes (APDU) .
In combination with the Apricum line coupler “MEC
tp”
long messages are made
possible (e.g. for energy metering applications).

With the ability to feature a tunneling protocol conversation, a connection point for the
ETS or other tools to enable commissioning and monitoring is provided (four parallel
connections are possible; one separate address for each connection). The ETS address
for tunneling is not necessarily the one which is already configured.

The great advantage of tunneling is using LAN as a fast medium to exchange telegrams
between the lines and/or areas.

The UIM ip is featuring a high internal amount of communication buffers being capable
of smoothening peaks in the communication load course.

Using a high internal amount of communication buffers is suitable for networks with a
high bus load.

UPnP is available to discover the device in an IP network. In terms of topology, this is
only possible with a proper network installation. With the KNXnet/IP Search Request
the ETS can discover the device as communication interface.

The comfortable operation via a Web interface provides the option to modify a set
of tunneling addresses of the device and an opportunity to switch the “Program Mode”
on or off. Also the firmware can be updated via the
Web Front-End .

The UIM ip
’s ETS database entries are available for the ETS3.0d and upward.

The UIM ip supports KNXnet/IP, ARP, ICMP, IGMP, HTTP, UPnP discovery,
UDP/IP, TCP/IP, DHCP and AutoIP.