UIM
ip
- TAD
14 / 19
02.03.2017
7.5
T
UNNELING
A
DDRESSES
(A
DDITIONAL
P
HYSICAL
A
DDRESSES
)
According to the host’s physical address assignment (see
Programming Button and Physical
) the first additional physical address of the
UIM
ip
can only be set with
the ETS.
Please make sure:
The additional physical addresses for tunneling and the host´s
physical address have to be different.
Step 1:
Open the Bus tab in the ETS and select the UIM
ip
as the
“Current Interface”. In the “IP Tunneling” window the already assigned
host physical address can be read.
Picture 15: First additional physical address (tunnelling address)
Step 2:
Type the additional physical address into the “Individual Address” field.
Click on the “Test” button. If the green
Ok
appears, the first tunneling
address is already set. In this example it is set to “9.1.241”.
Step 3:
Now open the KNX tab of the Web front-end. Click on the “Set” button to
change the remaining three tunneling addresses basing on the first tunneling
address as follows.
Picture 16: Additional tunneling addresses