55
9-1-2022
APQS.com
Lucey Operation
9.
To insert the thread into the pigtail guides, take the thread behind the guide on its rounded side,
as shown in the center photo. Next, grab the portion of thread that is coming down from the top
and pull it forward past the sharp edge of the pigtail guide, from the right. This will slip the
thread inside the guide without having to poke it down into the guide.
10.
The first pigtail guide is on the right side of your machine’s head and the next two photos show
the pigtail guide that is directly above your needle.
7. From the check spring on the tension disks, feed the thread down and under the L-shaped guide
(shepherd’s hook), up through the take-up lever and down through the pigtail thread guide as
shown above.
