User's Manual
3.
POSSIBLE SETUPS
The device can be used in three different setups, shown below:
SETUP
flexAUX card
Double-flexiverter
flexmultiverter
How it works
Converts between built-in
interface and the AUX card.
Devices are connected via
FlexLink cable.
Converts between one
FLX(+AUX) and the other
FLX(+AUX).
Flexiverter connected to
multiverter via FlexLink
cable.
FLX(+AUX) serves as
extension to the MVR-64
Channels
(all can be used at
the same time)
16x16 AES3 @ 48kHz
16x16 AES3 @ 96kHz
16x16 AES3 @ 192kHz
or maximum capacity of the
AUX card, whichever is less
16x16 AES3 @ 48kHz
16x16 AES3 @ 96kHz
16x16 AES3 @ 192kHz
plus what the AUX card
provides
448x448 from multiverter
plus 16x16 AES3
plus what the AUX card
provides
Redundant
power supply
up to 2x
up to 3x
up to 3x
Battery-powered
operation
(DC 12-15V)
yes
yes
yes
Sample Rate
Conversion
no
no
yes (with SRC-64 card in
Multiverter)
Signal splitting
yes (to AUX or FlexLink)
yes (to AUX or FlexLink)
yes, to everything
Channel-wise
routing
no
no
yes, via MVR-64 (web, telnet
or serial terminal)
Remote control
no
no
yes, via MVR-64 (web, telnet
or serial terminal)
Rack mount
1U total
1U total
2U total
3.1.
Available AUX cards
At the time of writing (2021-11), the following AUX cards are available. More will
come, please check
for updates.
Item
Description
AUX-ADAT
16x16ch ADAT I/O (2x Toslink In+2x out). Supports also S/PDIF
AUX-AES3
8x8ch AES3 I/O on 1x DB25, fully transformer isolated
AUX-AES67
64x64ch AES67 network card
6
