Appro DVR-3716, Руководство по установке и эксплуатации

Страница: 32 / 55

5.7 SYSTEM SETTING
Enter the system setting mode to select your desired setting.
MAIN MENU
1 QUICK SETTING
ENTER
2 DISPLAY OPTION ENTER
3.SEQUENCE SETTING ENTER
4.PICTURE ADJUST ENTER
5.ADVANCED SETTING ENTER
6.DISK SETUP ENTER
7.SYSTEM SETTING ENTER
SYSTEM SETTING
1.VIDEO SYSTEM
NTSC
2.MENU PASSWORD 9999
3.MENU PWD ENABLE OFF
4.LOAD FACTORY SETTING ENTER
5.UPDATE FIRMWARE
ENTER
SYSTEM VERSION
1.02
1. VIDEO SYSTEM:
Select the NTSC or PAL formats. In the NTSC system, the time display type is MM/DD/YYYY. If
the user selects the PAL system, the type will change to DD/MM/YYYY automatically.
2. MENU PASSWORD:
This option lets you set a password to block any unauthorized entry. The default password is
9999
. Use the “^” or “v” button to set a 4-digit password of your choice.
3. MENU PWD ENABLE:
Activate to
ON
( enable ) or
OFF
( disable ).
After setting the password and enabling this function, when you enter the
MAIN MENU
the next
time, a message of
“CHECK MENU PASSWORD”
will appear. Please enter the correct
password, then press the
Enter
button to enter the
MAIN MENU
.
4. LOAD FACTORY SETTING:
If you want to execute the default setting, shift the focus to this item and enter. After entering the
item, a message of
“LOAD FACTORY SETTING”
will appear. If you want to load the factory
setting, please select
“YES”
, then press the
Enter
button.
5. UPDATE FIRMWARE:
If the system software of the DVR needs to be upgraded, please take the following steps to
safely update it.
(1) Copy the file of
update.bin
into your USB device.
(2) Please highlight
UPDATE FIRMWARE
, then press the
Enter
button.
(3) After entering the item, a message of
“UPDATE FIRMWARE?”
will appear.
PROGRAM FLASH: SUCCESS
(4) If you want to update the system software, please select
“YES”
, then press the
Enter
button.
PRESS POWER KEY TO RESTART
(5) When a message of appears, please press the power
button to restart the device.
NOTE: Before carrying out the following procedures, please ensure the USB device is
working and the system software file is intact.
6. SYSTEM VERSION:
You can find the software version here.
30