Appro DVR-3716, Руководство по установке и эксплуатации

Страница: 29 / 55

When a DVR is connected to a WAN, you must acquire a unique, permanent IP address
and correctly configure the MASK and GATEWAY settings according to your network
architecture. If you have any questions regarding these settings, please contact a qualified
MIS professional or your ISP.
NOTE:
When connecting to a network, each connected DVR must be assigned a unique IP,
which must be in the same class type as your network address. IP addresses are written as
four sets of numbers separated by periods; for example, 192.168.1.1 Therefore, if the
connected network is identified as Class C, for example, the first three sets of numbers of
the DVR IP address must be the same as in the network address. If the connected network
is identified as Class B, the first two sets of numbers of the DVR IP address must be the
same as in the network address. If you have any questions regarding these settings, please
contact a qualified MIS professional or your ISP.
7.
ENVIRONMENT:
Select this item and use the “
↑
” and ”
↓
” buttons to select the ENVIRONMENT
from: “EXTER_WAN”, “EXTER_LAN” or “LOCAL”.
8.
DDNS SETTING:
DDNS
（
dynamic domain name system
）
is a function which is provided by an
American company. Please refer to www.dyndns.com.
NETWORK SETTING
1. NETWORK PASSWORD
9999
2. PORT DATA/CMD 5000/5001
3. IP MODE DHCP
4. IP ADDRESS
5. SUBNET MASK
6. GATEWAY
7. ENVIRONMENT EXTER_WAN
8. DDNS SETTING
ENTER
DDNS SETTING
1. DDNS MODE
OFF
2. HOSTNAME
dvr.dyndns.org
3. USERNAME username
4. PASSWORD 0000000000
DDNS MODE:
Activate
ON
or
OFF.
This option enables or disables the DDNS function.
HOST NAME:
The default host name is
dvr.dyndns.org
.
USERNAME:
The default user name is
username
.
PASSWORD:
The default password is
0000000000
.
27